Quick Fix Directions:

To use, simply pour contents of Quick Fix container into urine cup at the nicotine or drug testing facility. Make sure sample is within proper temperature range of 94°-100°F. The Quick Fix container can be microwaved up to 10 seconds for initial heat. Be sure to pop up the top prior to heating to release pressure. After heating, close cap and shake bottle. If the temperature remains out of range after first heating, repeat procedure. If the temperature is not in range after two attempts, make sure the container has not been over heated above the 100°F (let cool a few minutes). The heater pad without the microwave will require approximately an hour to warm up to range of 90°-100°F. The heater pad can also be taped to the bottle for prolonged heat, and will keep the bottle near 100°F for up to six hours in an inside pocket of clothing being worn. Some settling may occur. Shake bottle before and after heating, prior to deadline.

Quick Fix synthetic urine Warnings:

As of December 1, 2003 Quick Fix formula 4.0 replaced formula 3.0. All customers holding the Quick Fix 3.0 are encouraged to return the Quick Fix 3.0 product to Spectrum Labs for a free exchange to Quick Fix formula 4.0. Formula information is located on box bottom below Contents description. This product is not intended for use on lawfully administered drug tests and is to be used in accordance with all federal and state laws.

Warning: this product cannot be shipped to residents of AR, IL, KY, OK, NJ, NC or SC.